GTC Sound Innovations REVPAD, Руководство пользователя

Страница: 61 / 85

Auto Setup
Go to p3 of a selected patch editing screen to access the Auto setup parameters.
The Auto function simulates a finger movement on the REVPAD touchpad by pressing (touring) on the pad,
and without the need to move the finger at all.
When Auto mode is on, the pad will respond only to touching. Finger movement on the pad will be
disabled.
1. Select a patch for setup. See Creating and Editing Patches on page 26 for more information.
2. Go to p3 .
3. With
AUTO
selected press the down arrow on the Navigation Roller.
4. See the table below for an explanation of the settings of the ADSR and LFO options.
Note: Only one of these options can be active at the same time. If LFO is chosen ADSR is disabled. Likewise, if ADSR is chosen LFO is disabled.
ADSR Options (
A
)
Name Value Notes
ADSR X, Y, XY, Z, OFF Choose the direction the simulation will work
MIN 0 The minimum value of the movement, where the movement begins
MAX 0-100 The maximum value of the movement, where the movements ends
GAP Simulates removing the finger from the touchpad in the end of the simulation sycle.
45
Customizing your REVPAD