GTC Sound Innovations REVPAD, Руководство пользователя

Страница: 76 / 85

REVPAD User Manual
MIDI-OUT
The MIDI-OUT procedures below allow you to
• Use your REVPAD Touchpad to send program change values to your MIDI device ( MIDI-OUT Program Change )
• Use your REVPAD Touchpad to send control change values to your MIDI device ( MIDI-OUT Control Change ).
MIDI-OUT Program Change
Setting up your REVPAD system for MIDI-OUT Program Change allows you to use your Touchpad to send program changes to an
external MIDI device.
Note: Because you will be looking at the Touchpad from above when it is attached to your guitar, the illustration shows the "guitarist-eye-view."
1. Connect a cable from the MIDI-OUT/Thru connector in the back panel of the base
unit to the MIDI-IN port of your MIDI device and verify that the MIDI TX channel
is set correctly, according the requirements of your MIDI device.
See MIDI
Control on page 57 for more information.
2. Choose the number of segments you wish to make active on the Touchpad. You
can split the pad into two, four, or six segments (
A
). Press SYS and then
navigate to the pad setting screen in system configuration. See Pad Settings on
page 51 for more information.
3. Decide the behavior you want when invoking a MIDI Program Change set. Go to
MIDI Settings in the SYS menu and navigate to the PC TX FUNCTION screen
and select one of two options:
•
Select Only
allows you to select the MIDI patch. Press the Touchpad Control Button again to make the patch active.
60