GTC Sound Innovations REVPAD страница 9 Скачать руководство пользователя

Страница: 9 / 85

Protecting From the Elements

• The REVPAD is designed for indoor use. Do not operate the system outdoors without proper protection against mist or rain.

• Do not expose the REVPAD to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on

the apparatus.

• Unplug the unit during lightning storms and when not intended for use for long periods of time.

Protecting the Power System

• Use only the power adaptor supplied with the system.

• Protect the power cord from being walked on or pinched.

• The DC power jack is used to disconnect the REVPAD. Please keep this plug accessible.

• Charge the REVPAD Touchpad frequently; this will increase the lifetime of the battery.

• In long storage periods it is recommended to remove the battery from the REVPAD Touchpad.

• Limit exposure to extremely high noise levels.

• Charge the REVPAD Touchpad with the USB cable supplied with the system. Do not charge the battery using an external charger

at any time.

Note:

After connecting the USB wait for a message to appear in the base unit display area before continuing. If this is the first time you are using
the Touchpad the message will say

PAD WAS SUCCESFLLY ASSIGNED

. Otherwise the message will say

PAD CONNECTED

iii

Welcome to the Creative World of the GTC Sound Innovations REVPAD

Содержание REVPAD






















































































Результаты поиска

Содержание REVPAD

Отзывы:

Похожие инструкции для REVPAD

Бренды по названию

Популярные бренды

GTC Sound Innovations REVPAD, Руководство пользователя

Результаты поиска

Содержание REVPAD

Отзывы:

Похожие инструкции для REVPAD

Бренды по названию

Популярные бренды