GST GST-IFP4M, Инструкция по установке и эксплуатации

Страница: 44 / 101

GST-IFP4M Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page
39

NAC2TROUBLE/DIS : This LED is enabled when NAC2/AUX output is programmed
as “NAC” (See Fig 4.10). It lights when NAC2 port is fault; it goes out as the fault is
removed. If NAC2 is disabled, the LED flashes.

FIRE ALARM : Red. It lights when there is an alarm message.

NAC1 ACTIVATED : Red. It lights when NAC1 outputs; it goes out as SILENCE
ALARM key is pressed.

NAC2 ACTIVATED : Red. It lights when NAC2 outputs; it goes out as SILENCE
ALARM key is pressed.

GROUND TROUBLE : It lights when there is ground trouble; it goes out as the trouble
is removed.

DETECTOR DIRTY : It lights when the detector is dirty; it goes out as the dirt is
reported.

DELAY MODE : It lights when the FACP enters delay mode; it goes out as the FACP
exits delay mode.
Warning: The Delay Mode shall NOT be applied to required output fire signaling in
UL864. It may only be used for supplementary process controls.

TEST MODE : It lights when the FACP enters test mode; it goes out as the FACP
exits test mode.

MAINTENANCE : It lights when the FACP enters maintenance mode; it goes out
when the maintenance is completed.

FIRE ALARM INFORMATION : Red. It flashes when an alarm message is not
confirmed. It lights when all alarm messages have been confirmed.

SUPERVISORY INFORMATION : It flashes when a supervisory message is not
confirmed; it lights when all supervisory messages has been confirmed.

TROUBLE INFORMATION : If flashes when a fault message is not confirmed. It lights
when all fault messages have been confirmed; it goes out as all fault messages are
cleared.

DISABLE INFORMATION : It lights when a disabled message exists; it goes out as
the message is disposed.

STATUS INFORMATION : It lights when any message exists; it goes out as all
messages are disposed.

MANUAL ALARM : It lights when the MANUAL ALARM key is pressed.

ACKNOWLEDGE : It lights when all real messages have been confirmed. It goes out
as a new message occurs.

SILENCE ALARM : The LED lights when any NAC is silenced. It goes out when all
silenced NACs are reactivated .

SILENCE BUZZER : It lights when the buzzer of the FACP is silenced. It goes out as
the buzzer sounds again.

ALL RESOUND : It lights when ALL RESOUND key is pressed. It goes out when any
NAC is silenced again.