GSSI SIR 20, Руководство пользователя

Страница: 60 / 100

Geophysical Survey Systems, Inc. SIR® 20
Manual
MN92-078 Rev F 54
Figure 55: Linescan Collection Screen.
Cursor coordinates are displayed in the upper left corner of display when the left mouse button is pressed.
The distance coordinate is the position of the antenna center, the depth coordinate will change as you
move the cursor vertically in the window.
1
To continue data collection on the same survey line, reverse cart travel direction along survey line
(following initial direction). Data will be collected once the handcart returns to the point where it was
initially reversed for feature ID.
Note:
Do not move handcart from the current survey line if you wish to continue data collection
along this line.
Note:
The position cursor is active during data collection ONLY when backup cursor is
activated.
2
Press Stop to end data collection. You will be prompted to save the data file. Whether or not you
save, the scan will remain on the screen.
3
To begin another scan, press (F2). A new file name can be inserted if desired.
4
The Position & Gain servo previously set in the oscilloscope window will be used for subsequent
files.
5
If working on a different material, surface, or if a different depth is desired, press (F9) to
Initialize system and adjust settings.