GSSI SIR 20 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 100

background image

Geophysical Survey Systems, Inc.

SIR® 20

Manual

MN92-078 Rev F

51

Chapter 4: Information for StructureScan Users

Figure 52: StructureScan Programs.

This section is for users of the SIR 20-based StructureScan Professional. It covers the operation of the
three StructureScan data collection programs and the processing of the data from these programs. The
StructureScan Professional package typically includes a Model 5100 (1.5 GHz) or 5100B (1.6 GHz) high-
frequency antenna, Model 614 or 615 survey minicart, and scan pads. StructureScan systems may also
come with Model 5101 (1.0 GHz) antennas. The three modes are described briefly below.

SS Linescan:

This program is for use with the Model 3101 (900 MHz), 5100, 5101, and 5100B antennas.

A survey minicart is required for SS Linescan. This program is designed to be used for real time location
of targets on a slab surface. The data collected in this program is not intended for post-processing in
RADAN.

Structure Scan:

This program is intended for use with the 5100 or 5100B antennas and the black

rubberized scan pad (FGDATAGRID). This program is intended to collect 26 two-foot long profiles
collected in a specific order over that scan pad.

Optical Scan:

This program is for use with a 5100B or 5101 antenna and the optical barcode equipped

minicart. You will also need some of the barcode paper scan pads. These come in 1x1, 2x2, and 2x4 ft
(30x30, 60x60, and 60x120 cm) sizes as well as the metric equivalents. This is the latest edition to the
StructureScan product family and allows easier collection and collection of different size grids.

SS Linescan

Select the SS Linescan Mode icon on computer Desktop. Data files collected in SS Linescan are
automatically saved to the directory: Program Files_GSSI_RADAN NT_radandat.

Please note that data collected in Linescan mode are 8 bit, 5 scans per inch, with 3 gain points.

Software Setup

1

Connect your antenna and minicart to your SIR 20. Double-click the SS Linescan icon on the
Windows desktop. The Linescan program will open up and you will see a pop-up window which says
Initializing Data Storage.

Note:

If you see a window saying Radar Antenna Not Found, check all connections to make sure that

the antenna is connected properly and that the SIR 20 is powered up. Just because the laptop is on
does not mean that the SIR 20 is also receiving power. The laptop can run for a short time from its
internal battery.

«
...
55
56
57
58
59
...
»

Содержание SIR 20





































































































Отзывы:

Нет отзывов

Похожие инструкции для SIR 20

Бренд: Bushnell Страницы: 9

Бренд: Radio Shack Страницы: 45

Бренд: Gogen Страницы: 28

Бренд: boytone Страницы: 4

Бренд: Imperial Страницы: 40

Бренд: Alinco Страницы: 41

Бренд: Daewoo Страницы: 2

PUBLIC ALERT WX-200

Бренд: First Alert Страницы: 16

Бренд: Star Microwave Страницы: 79

Бренд: Lars Thrane Страницы: 83

Бренд: Freetalker Страницы: 9

Бренд: trig Страницы: 30

Бренд: CMX Страницы: 23

Бренд: K.A.T. Страницы: 8

Бренд: RCA Страницы: 14

Бренд: Tait Страницы: 53

STEREO MATE 12-791

Бренд: Radio Shack Страницы: 28

Бренд: Radio Shack Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды