GSSI SIR 20, Руководство пользователя

Страница: 44 / 100

Geophysical Survey Systems, Inc. SIR® 20
Manual
MN92-078 Rev F 38
8
The next window (Figure 39) will prompt you to either create a new macro or attach one that you
have already created. A macro is nothing more than a saved list of data collection parameters. These
parameters include: filters, time range and gain settings. These will vary from job to job, so it is
possible you will have many different macros for different situations.
Figure 39: Attach a Macro or Create a New One.
•
There are no pre-saved macros on the system, so if you are using your SIR 20 for the first time
you will need to create one. Click the button for Create New Macro and click Finish. The antenna
will initialize, you will see a stop watch counting a few seconds and then the following window
will pop-up:
Figure 40: The Setup Screen.
9
This window will allow you to further customize your collection parameters. The window is divided
into two main areas.
•
The top 2/3 of the window shows the data display as O-scope and Linescan.
•
The bottom 1/3 is reserved for parameter selection pop-up windows. These parameter selection
windows can be accessed by clicking on one of the blue and yellow collection parameter controls
at the bottom of the screen.
•
You can also check the file header by clicking on the File Header icon.