manualshive.com logo in svg

GSS DRS 550 HDMI, Руководство по эксплуатации

Поделиться
Скачать
GSS DRS 550 HDMI Скачать руководство пользователя страница 6

- 6 -

- 6 -

To help you with the choice and settings for satellite channels, a selection of TV and 
radio stations have been preprogrammed for this device. New channels, which are 
not yet featured in the channel list on your satellite receiver, can be found using the 
channel search.

2.4 

Special facilities of your satellite receiver

This satellite receiver allows you to receive both free-to-air as well as encrypted digital 
satellite channels from various encryption systems using the Common Interface slots 
(see page 56), and to record them using a storage device (e.g. hard disc, USB stick) 
connected to the USB port.
To ensure that your satellite receiver always uses the latest software, we recommend 
that you update the operating software from time to time (see page 40).
This satellite receiver has a comprehensive, user-friendly menu system. It is displayed 
on the television screen and the functions of the remote control buttons are explained.
The technology used allows the simultaneous recording of a SAT program and play-
back of a recorded program when an external storage device is connected. This pro-
cedure is used for the so-called 

“

time shift

”

 (time-delayed television).

2.5 

Features of your satellite receiver

•  10-character, alphanumeric display
•  Common Interface slot
  Your satellite receiver is equipped with a Common Interface slot. It allows you to 

connect two CA modules for various encryption systems and service providers. 
Encrypted channels can only be decoded with a CA module suitable for the en-
cryption system and the corresponding Smart card. The Smart card contains all the 
information for authorisation, decoding and subscription.

  The CA module and the corresponding Smart card can be obtained from the de-

sired service provider.

•  4,000 radio and television stations can be stored.
•  Blind and fast scan
•  You can save your preferred channels in individual lists of favourites.
•  DiSEqC 1.0/1.1 and Unicable mode
 DiSEqC 

means 

“

Digital Satellite Equipment Control

”

. This is a circuit system which 

controls the polarisation and the frequency bands. The Unicable mode is used to 
control the satellite receiver in reception systems with Unicable-LNBs or Unicable 
multi-switches.

•  The electronic program guide EPG informs you about the complete range of chan-

nels from the various broadcasters. Detailed information on individual television 
programs is available at the touch of a button.

•  Using the HDMI connection (High Definition Multimedia Interface), high definition 

picture signals and sound signals are provided digitally.

•  Using the USB port an external storage device (e.g. hard disc, USB stick) can be 

connected. 

•  SCART sockets for connecting TV and recorder 
•  SAT input with loop-through output
•  Analogue audio outlet via Cinch sockets

Содержание DRS 550 HDMI





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды