manualshive.com logo in svg

GSS DRS 550 HDMI, Руководство по эксплуатации

Поделиться
Скачать
GSS DRS 550 HDMI Скачать руководство пользователя страница 29

- 29 -

- 29 -

ENGLISH

8.4.5 Setting  

daylight saving time

This menu allows you to set whether the changeover to daylight savings is done manu-
ally or automatically.

•  In the menu “

Time/Date

” use the 

▼

/

▲

 buttons to activate 

the line “

Automatic daylight saving time

” and confirm 

 using 

OK

.

• In the selection menu which appears, use the 

▼

/

▲

 

 buttons to select the desired setting “

On

” or “

Off

”.

—> Setting “

On

”.

 

Daylight saving changeover takes place automati-
cally.

—> Setting “

Off

”.

 

When daylight saving time commences the local 
time must be set manually (s. chapter 8.4.3).

•  Confirm the setting using 

OK

.

•  To exit the menu, see chapter 8.1.8, page 22.

8.5 

Adjusting the satellite receiver to the  reception system

This satellite receiver was factory pre-programmed to be ready for operation with most 
satellite antennas and Universal-LNB configurations. For operation on satellite receiv-
ing systems with a Unicable-LNB or a Unicable multi-switch the satellite receiver must 
be set accordingly. 
Unicable refers to a type of installation allowing several satellite receivers can be con-
nected to a Unicable-LNB or to a Unicable multi-switch using one cable. For each of 
the satellite receivers connected, the independently-selectable satellite channels are 
transmitted on a frequency assigned to the respective satellite receiver.
Changes in this menu have a direct effect on the reception characteristics of the satel-
lite receiver and should therefore only be made by an expert.
This menu allows you to set the following parameters for adjusting the satellite receiver 
to the reception system:
-  Selection of the LNB-type (Universal/Unicable)
- Satellite 

selection

-  Lower oscillator frequency of the LNB
-  Upper oscillator frequency of the LNB
- Band 

changeover

- DiSEqC 

settings

-  IF frequency (Unicable only)
-  IF channel (Unicable only)
Signal quality and signal strength are also displayed.

Next to the menu line all the relevant, current settings can be viewed. The lettering in 
non-active lines is displayed in grey.

OK

Date

Time zone

Automatic Time Update

On

15. Aug. 2008

09 : 35

Amsterdam GMT + 1

On

Local Time

Time / Date

Automatic daylight saving time

On

Off

Exit

Back

MENU

Z

Содержание DRS 550 HDMI





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды