GSS DRS 550 HDMI, Руководство по эксплуатации

Страница: 57 / 68

- 57 - - 57 -
ENGLISH
13.1 Reception of channels with subprograms
If the symbol at the left appears in the channel information, displayed when
changing channels or pressing the
i button, this indicates that subprograms
are available.
• Press the i button to display channel information.
—> It can take several seconds to display the symbol.
• Display the list of subprograms using the F button.
• Select desired channel using
▼
/
▲
and display it using
OK .
—> If the
$$
symbol appears in the channel information
on display, this indicates that a CA module with an
appropriate Smart card is required to receive this
program.
14 Sleep timer
Your satellite receiver is equipped with a sleep timer, which allows it to switch to
stand-by mode after the preset time is over.
• Press the MENU button.
—> The “ Main Menu ” appears with the active line
“ Settings ”.
• Select the line “ Sleep Timer ” using the
▼
/
▲
buttons and
confirm using OK .
—> The menu “ Sleep Timer ” appears with the active line
“ Time ”.
• Confirm line “ Time ” using OK .
• In the selection menu which appears use the
▼
/
▲
buttons
to select the desired switch-off time in 15 and 30 minutes
intervals (
15 … 120 minutes) or if the sleep timer should
be deactivated, select “ Off ” and confirm using OK .
—> The satellite receiver switches to stand-by mode
after the time is set.
• To exit the menu, press the Z button.
OK
2 List Manager
5 Parental Lock
4 Personal Planner
1 Settings
3 Program Guide
6 Common Interface
Main Menu
7 Sleep Timer
8 Read Messages
9 Exit
Exit
Back
MENU
Z
Exit
Time
Sleep Timer
OK
Off
15
30
45
60
90
120
Back Z