GSI Group 890-00583, Руководство пользователя

Страница: 20 / 90

Chapter 3: Basic Operations
Acknowledging the alarm puts a stop to the notification process and you can take action to get the zone
back into a normal condition.
• When on-site, proceed as follows:
1. Either from a module connected to the system or on the system’s user interface, enter your
password when prompted.
2. Find the source of the problem and take action to return the zone into a normal state.
• When notified by phone, text, or e-mail, proceed as follows:
1. Enter your four digit password when asked by the system.
2. Contact someone on-site or take action to return the zone into a normal state.
NOTE: If you receive a message from the system on your phone, you can call the system and
follow the instructions to acknowledge the alert.
Setting the Date and Time Parameters
1. Click on Menu→System→Settings→Time and units .
2. Set the time and date and choose the desired format for display.
Bypassing a Zone
Bypassing a zone allows you to keep the zone enabled, but not monitored by the system for a period of
time. The zone keeps its configuration, but no alerts are set off by the system for bypassed zones.
1. Click on the zone you would like to bypass on the zone monitoring screen (main page).
2. Click on the Bypass button .
The zone tile turns yellow and the minimum and maximum thresholds are no longer displayed.
3. To return to monitoring mode, click on the Bypass button.
The zone tile turns green and the minimum and maximum thresholds are displayed.
Deleting Groups of Information
Keeping accurate information such as contacts, contact groups, temperature curves and zones ensures
no false alerts are generated and the correct people are informed when an alert does occur. When informa-
tion is no longer valid, you can erase a group of information at the same time.
Before You Begin
IMPORTANT: The following steps delete the entire displayed page including information in all tabs.
1. Navigate to the page where you would like to delete the information.
2. Click on the garbage icon .
A message prompting you to confirm you want to delete all information on the page is displayed.
20 895–00677 Agri-Alert 128 Touch