4
Description
Purpose:
PC Tool CU 300 can be used for...
• Configuration of CU 300 and SQE pump (e.g. during installation).
• Interactive operation and monitoring of SQE pump installations with CU 300.
• Troubleshooting CU 300 and SQE pump.
• Demonstration of CU 300 and SQE pump functionality for training or
sales purposes.
• Showing perspectives in CU 300/SQE pump networking and SCADA system
applications.
User interface
PC Tool CU 300 uses a graphics based user interface with active zones (hot spots),
giving the user a visual impression of control actions and the relation between the
data information and the physical pump application.
Possibilities
Via the interactive graphics the user can operate and monitor single CU 300 units or
complete GENIbus networks of up to 32 CU 300 units.
Via a modem or via the Grundfos gateway G100 with radio or modem the PC Tool
CU 300 can operate distant single CU 300 units or large CU 300 networks.
Optional connections
There are three main options for connection of a PC to a CU 300:
1. Using RS-232 for direct connection, see fig. 1, 1a, or connection via modem, see
fig. 1, 1b.
2. Connection to GENIbus via the GRUNDFOS PC Tool Link adapter, see fig. 1, 2.
3. Via G100 port 1 (using the G100 Radio/Modem/PLC version in the following re-
ferred to as the R/M/P version), see fig. 1, 3.
The connection to choose depends on your application and your requirements.
TM01
779
1 080
2
Fig . 1
Different connection options.
*) The version shown is an R/M/P version.
The service port can be used on any G100 version for direct and modem connection.
Note:
Only connection 1a can be made without extra cables or equipment.
Port 1
Main
Network
Connection
POWER
POWER MNC
POWER GENI
GENI TxD
GENI RxD
FAULT
DCD
RTS
TxD1
RxD1
TxD2
RxD2
Port 2
Genibus
DI
Service
1
2
a)
b)
a)
b)
c)
3
Direct
Modem
RS-232/RS-485
GRUNDFOS
PC Tool Link
adapter
RS-485
RS-485
CU 300
CU 300
CU 300
CU 300
Direct
Modem
Radio
G100*
GENIbus
GENIbus
Port 1
COM port
COM port
COM port
Max. 32 units
Max. 32 units
CU 300
RS-232
Содержание PC Tool CU 300
Страница 1: ...Installation and operating instructions GRUNDFOS INSTRUCTIONS...
Страница 2: ...2...