English (GB)
26
00233
Bit 0:
Pitpump1CommFault
Bool
Indicates if there is a communication fault on pump 1.
0: No fault
1: Fault.
Bit 1:
Pitpump2CommFault
Bool
Indicates if there is a communication fault on pump 2.
0: No Fault
1: Fault.
Bit 2:
Pitpump3CommFault
Bool
Indicates if there is a communication fault on pump 3.
0: No fault
1: Fault.
Bit 3:
Pitpump4CommFault
Bool
Indicates if there is a communication fault on pump 4.
0: No fault
1: Fault.
00234
OperatingMode
Enum
Used in single-pit mode only. Pit mode: 0.
Operating mode of the pump pit.
0: Standby
1: Startup delay
2: Pumping (level control)
5: Stopped (level control)
9: Manuel control (all enabled pumps in manual control mode)
11: Mains supply failure
13: Alarm on all enabled pumps
14: All pumps out of operation.
00235
Bit 0: WarningInPumpOrPit
Main status of warning(s).
0: No warning(s)
1: Warning(s) on a pump or in the pit.
Bit 1: AlarmInPumpOrPit
Main status of alarm(s).
0: No alarm(s)
1: Alarm(s) on a pump or in the pit.
Bit 2: RESERVED
-
Bit 3: ManualControlStatus
Main status of manual pump control.
0: No manual pump control enabled (full "Auto")
1: Manual pump control enabled (partly or completely).
00236
SignalLevelActual
1 %
Actual level of cellular network signal. CIM 260 only
00237
SignalLevelAverage
1 %
Average level of cellular network signal. CIM 260 only
00238
00239
IPAddressHI
IPAddressLO
Unscaled IP address for data communication. CIM 260 only
00240
Bit 0: AlarmBitsExternalFault
External fault signal
Bit 1: AlarmBitsCommunicationFault
Communication fault, pump
Bit 2: RESERVED
-
Bit 3: AlarmBitsPump1Fault
Pump 1 fault
Bit 4: AlarmBitsPump2Fault
Pump 2 fault
Bit 5: AlarmBitsPump3Fault
Pump 3 fault
Bit 6: AlarmBitsPump4Fault
Pump 4 fault
Bit 7: AlarmBitsSensorLimit2Exceeded
Sensor limit 2 exceeded (High level)
Bit 8: AlarmBitsSetupConflict
Setup conflict
00241
Bit 0: RESERVED
-
Bit 1: WarningBitsCommunicationFault
Communication fault, pump
Bit 2: WarningBitsVerificationError
Verification error, code area (ROM, FLASH)
Bit 3 -7: RESERVED
-
Bit 8: WarningBits.SetupConflict
Setup conflict
Address
Register name
Scale
Description
