Iron / manganese removal
Demanganisation system GENO-mat MN-Z
Order no. 095 153 048-inter Edited by: nkes-mrie G:\BA-153048-INTER_095_GENO-MAT_MN-Z.DOCX
27
Backwash dial
Button for time setting
Hour dial
Reference arrow for current time and operating state
(black)
Reference arrow (red)
Reference point for operating state (white)
Day dial
Steel switching pin (in home position
moved to centre point, in switch position
moved outwards)
Fig. F-1: Control unit and operating elements "front view"
2. Push the switching pin (fig. F-1, pos. 5) outwards for the 1st day.
3. Set the other switching pins as required.
On all days where the switching pins are pushed outwards, the
backwash is initiated. In order to set, for example, a backwash in-
terval of 3 days, the switching pins in positions 1, 4, 7 and 10 on
the day disk must be pushed outwards (fig. F-1, pos. 4).
1.3
How to read the
operating state
The current operating state may be read from the position of the ref-
erence point (fig. F-1, pos. 8) on the backwash wheel (fig. F-1, pos.
1).
The reference point
(fig. F-1, pos. 8) lies op-
posite the reference arrow
(fig. F-1, pos. 7).
Operating mode: pure water is available.
