Iron / manganese removal
Demanganisation system GENO-mat MN-Z
Order no. 095 153 048-inter Edited by: nkes-mrie G:\BA-153048-INTER_095_GENO-MAT_MN-Z.DOCX
11
C Product description
1 | Type designation plate
The type designation plate is located on the control head of the de-
manganisation system. In order to speed up the processing of your
inquiries or orders, please specify the data shown on the type desig-
nation plate of your system when contacting Grünbeck. Please add
the necessary information to the table below to have it readily availa-
ble whenever necessary.
Demanganisation system
GENO-mat MN-Z
Serial number:
/
Order number:
Fig. C-1: Type plate for demanganisation system GENO-mat MN-Z
2 | Technical specifications
The GeNO-mat MN-Z demanganisation system is a single system
with integrated bypass for the supply of raw water during the back-
wash process. It is equipped with a timer control. The backwash is
initiated after a set time interval.
All system data is summarised in table C-1. The data refers to the
standard versions of the GeNO-mat MN-Z demanganisation system.
Possible deviations in case of special versions are communicated
separately, if applicable.
Caution!
Electrically operated valves. In case of a power failure dur-
ing the backwash, water may enter the drain. In the event of power
failure, check the system and shut-off the water supply, if necessary.
