Deferrisation
GENO-mat FE-Z Deferrisation System
Order no. 025 153 940-inter Edited by: nkes-mrie G:\BA-153940-INTER_025_GENO-MAT_FE-Z.DOC
18
1.1 Water installation
When installing the GENO-mat FE-Z deferrisation system, certain
rules must be strictly complied with. Additional recommendations are
given in order to facilitate the handling of the systems. The installa-
tion information described below is also illustrated in fig. D-2.
Binding rules
The installation of the GENO-mat FE-Z deferrisation system repre-
sents a major interference with the drinking water system. Therefore,
only authorised experts may install such systems. In Germany, the
installation company must be registered in an installation directory of
a water company as per §12(2) AVBWasserV (German Ordinance
on General Conditions for the Supply of Water).
Observe local and general installation guidelines.
Provide a drain connection to discharge the backwash water.
The installation room must have a floor drain (DN 100). If no floor
drain is available, a corresponding water stop device has to be in-
stalled.
Observe the flow direction!
Recommendations
Provide a sampling valve and a pressure gauge directly upstream
and downstream of the GENO-mat
FE-Z deferrisation system (0 -
10 bar). This simplifies the sampling for the regular determination
of the iron concentration (functional check).
1.2 Electrical
installation
A shock-proof plug is adequate for the electrical connection. Howev-
er, it must comply with the specifications given in table D-1, may not
be further than 1.20m away from the GENO-mat FE-Z deferrisation
system and must carry constant voltage (do not couple with light
switch)!
