Grunbeck GENO-mat duo WE-OSMO-X 130, Руководство по эксплуатации

Страница: 28 / 57

Water softener
GENO-mat duo WE-X,
GENO-mat duo WE-OSMO-X
Order no. 074 184 046-inter Edited by: phar/mrie G:\BA-184046-inter_074_GENO-mat duo_WE-X.docx
28
3.2 How to connect the control unit
The work described here may only be performed by trained
electricians or electronics experts.
The control unit must be connected according to the terminal
diagram shown in Fig. D-2.

Note: The corresponding connection diagram is contained in
the electrical circuit diagram of the reverse osmosis system
or the operating instructions for the automatic salt reduction
system/compact air washer.


Note: Small systems (nominal connection diameter 1") are
supplied pre-assembled. This means steps 1 and 2 can be
skipped.
1. Attach the control unit to the connecting pipes using the
supplied fastening kit
Danger due to electrical energy!
Mains voltage is at terminals L, N and PE.
Do not connect system to mains before you have finished this
work.
2. Route the 7-core cable for the step motor and the 3-core
cable for the micro switch between the control valve and
control unit, and connect according to the terminal diagram
(chapter D-1.2.).
3. Connect the water meter according to the terminal diagram
(chapter D-1.2.1).
4. Connect the mains plug to the socket (chapter D-1.2).