![background image](http://html1.mh-extra.com/html/grunbeck/geno-mat-duo-we-osmo-x-130/geno-mat-duo-we-osmo-x-130_operation-manual_2270827047.webp)
Water softener
GENO-mat duo WE-X,
GENO-mat duo WE-OSMO-X
Order no. 074 184 046-inter Edited by: phar/mrie G:\BA-184046-inter_074_GENO-mat duo_WE-X.docx
47
Caution!
If the salt level falls below the minimum filling level,
hardness may break through.
Observe the minimum salt filling level (see Technical
Specifications, chapter C). In case of systems where no specific
value is indicated, refill the water softener as soon as the level
has fallen to just a few centimetres.
Evaluate the salt consumption with reference to the water
volume consumed.
Note:
Minor deviations are normal and cannot be prevented
technically. If you detect major deviations, please contact
Grünbeck’s technical service/authorised service company.
Check control valve to drain for tightness (in operating mode).
2.1 How to refill salt
Warning!
Impurities in the brine tank may adversely affect the
water quality.
For hygienic reasons be very careful when refilling salt.
Caution!
Insoluble impurities in the salt may cause malfunctions
at the brine valve and at the injector of the control valve. A
defined salt quality is required for the reliable function of the
water softener.
Only use salt tablets as per DIN EN 973 type A.
A few precautionary measures ensure hygienically and
technically perfect conditions:
Only store the salt in dry and clean areas.
Do not use salt from packages that are already open.
Clean the outside of the packages before opening them.
Fill the regeneration salt directly from the package into the
brine tank.
Close the brine tank immediately after refilling.
Содержание GENO-mat duo WE-OSMO-X 130
Страница 2: ......