Operating Instructions: LUB‐M
7
2) Safety Information
Basic information, which must be followed during assembly, operation and maintenance, is listed as follows. These Operating Instructions
must be read by all installation and operation staff before assembly and operation, and must be permanently available on site.
All personnel involved in installation, maintenance and operation of the system are to read these instructions carefully before beginning
assembly and operation.
2.1 General safety information
2.1.1 Qualification and training of personnel
All operation, maintenance, service and installation personnel must be appropriately qualified for this work. Responsibility
and supervision of the personnel must be clearly defined by the end user. If staff do not have the necessary knowledge,
they must be trained and instructed. The end user must ensure that staff have completely understood the contents of the
Operating Instructions.
2.1.2 Danger of non-compliance with the safety instructions
Non-compliance
with the
safety information
can be
dangerous for people
, environment and machines. Non-
compliance with the safety information can mean the loss of any or all damage claims. In certain cases, non-compliance
can, for example, lead to the following hazards:
malfunction of important system functions.
malfunction of prescribed methods of maintenance and servicing.
danger to people due to electrical, mechanical and chemical effects.
danger to the environment due to leakage of dangerous substances.
2.1.3 Safety information for end user / operating staff
Moving, rotating, hot or cold machine parts are to be securely shielded on site to prevent accidental contact. The
shielding on moving or rotating parts is not to be removed.
Leakages of dangerous materials are to be removed in such a way as not to endanger people or the environment.
Legal regulations are to be complied with.
Electrical hazards are to be eliminated.
2.1.4. Safety information for maintenance, inspection and assembly work
All
maintenance, inspection
and installation work
may only be carried out
by trained specialists
who have been
informed appropriately by carefully studying the Operating Instructions.
All work
must only be carried out when the
machine is witched off
and while wearing appropriate
protective clothing
.
Always comply with the procedures for switching off as described in the Operating Instructions.
All safety and protective equipment must be replaced immediately after completing work.
Environmentally hazardous substances must be disposed of in accordance with local regulations.
Secure the system during maintenance and repair work against intentional or unintentional operation.
Dispose of lubricants in accordance with the safety data sheets of the lubricant manufacturer.
2.1.5 Unauthorised modification and manufacture of spare parts
Modification and alteration of the system is not permitted.
Original spare parts
and accessories authorised by the
manufacturer are for
safety
purposes. Using other parts can result in loss of liability for claims resulting out of this.
Gruetzner GmbH does not guarantee and is not liable for components retrofitted by the end user.
2.1.6 Prohibited methods of operation
Operational security of the Lubricus Lubrication System is only guaranteed if it
is operated in accordance with the Operating
Instructions
. The limit values listed in the Technical Data are under no circumstances to be exceeded.
