Operating Instructions: LUB‐M
31
Please note!
7.7 pulse control - acceptable Design
The specified lubricant quantity refers to the expected life of a piston pump or a pump unit. A service for the verification of the
performance of Lubricus M is recommended. Service interval is 65,000 cycles per pump unit. 65,000 cycles correspond to 10.000
cm³ lubricant.
See service: Readout of the device memory.
If a higher demand for lubricant at one lubricating point is required, the outlets of different pump units can be combined
externally.
Unused outlets must remain open to avoid damage to the pump!
Examples:
1 outlet supplying 1 lubrication point:
Allowed amount of lubricant for 1 lubrication point
=
max.
5,000 cm³ at 50 bar back pressure
2 outlets supplying 1 lubrication point:
Allowed amount of lubricant for 1 lubrication point
=
max.
10,000 cm³ at 50 bar back pressure
4 outlets supplying 1 lubrication point:
Allowed amount of lubricant for 1 lubrication point
=
max.
20,000 cm³ at 50 bar back pressure
