Operating Instructions: LUB‐M
21
Tim
e cont
ro
l
5.8
Change operating mode: Time control / pulse control
Factory setting: Lubricus M works in the „time modus“.
Basic setting:
Time control Pu0
= Time control „on“, pulse control „off“
ON
appears on the control panel and activated pump units flashing in sequence (indicated by a green LED).
Alternative:
Pulse Control Pu1
= Pulse control „on“, time control „off“
PUL
appears on the control panel and installed pump units flashing in sequence (indicated by a green LED).
Changing from „time control“ to „Pulse control“:
Lubricus M ist changed to pulse control.
„PUL“ is shown on the Display.
Example Pulse control (5 installed pump units)
Select Pu0 Function
Confirm with ENTER
Change Pu0 to Pu1 via SELECT
ENTER (Display is blinking 2 times)