Operating Instructions: LUB‐M
2
Pulse control
Tim
e cont
ro
l
Table of Contents
Contents
2
1) General Information
4
1.1 Warning
4
1.2 Scope of supply
4
1.3 Overview – the Lubricus M Lubrication System
4
1.4 Symbols and notes
5
1.5 Intended use
5
1.6 Liability and extent of guarantee
6
2) Safety Information
7
2.1 General safety information
7
2.2 Transport and storage
8
2.3 Installation
8
2.4 Maintenance
8
3) Lubricus M ‐ General information
9
3.1 Definition of terms
9
3.2 Display & Actuation Pad
9
3.3 Identification pump units and outlets
10
3.4 Grease cartridge Lubricus M
10
4) Function/Principle
11
4.1 Basic operation
11
4.2 Lubricus M operation menu (overview)
12
4.3 Start: control panel
13
4.4 Default indication control panel (time control)
13
4.5 Quick Check – back pressure control
14
5) Pro Program – time controlled lubrication intervals
15
5.1 Enter PIN
15
5.2 Input pause time and amount of lubricant
16
5.3 ESC – Exit the menu
18
5.4 CLr – delete error messages
18
5.5 FIL – first start‐up, venting the pump
19
5.6 Change PIN
20
5.7 Change Feedback (Pump function control)
20
5.8 Change operating mode: Time control / pulse control
21
6) Pro Program – pulse controlled lubrication intervals
22
6.1 Default indication control panel (pulse control)
22
6.2 Enter PIN
23
6.3 CLr – delete error messages
23
6.4 FIL – first start‐up, venting the pump
24
6.5 Change PIN
25
6.6 Change Feedback (Pump function control)
25
6.7 Change operating mode: Time control / pulse control
26
6.8 ESC – Exit the menu
26
7) Pulse signals to activate the outlets
27
7.1 Identification pump units and outlets
27
7.2 Pulse signals pump unit 1
28
7.3 Pulse signals pump unit 2
28
7.4 Pulse signals pump unit 3
29
7.5 Pulse signals pump unit 4
29
7.6 Pulse signals pump unit 5
30
7.7 pulse control ‐ acceptable Design
31
