BLADES AND ACCESSORIES
S
PECIALIST
B
LADES
Specialist blades are available or can be manufactured to suit your requirements including mole drain
ing, decompacting trenching and narrow multi strip sod cutting for sod walling (revetting) etc.
Contact Groundsman Industries Technical Department.
PRODUCT
C
ATALOGUE
See the full range of Groundsman Products and Accessories Catalogue available free of charge.
Phone:
(+44) 028 2766 7049
Fax:
(+44) 028 2766 6855
Email:
Website:
www.groundsmanindustries.com
Page 14
WHEEL WEIGHTS
A wheel weights kit is available for additional traction
when operating in very hard compacted conditions.
The kit consists of two disc weights and two mounting
stub axles. The stub axles are attached by the wheel
hub retainer bolt and incorporate a lynchpin quick
mounting method of attaching and removing the
wheel weights. The weights are fitted directly to the
wheels therefore no extra weight is felt by the operator
however, when manually lifting the machine the
wheel weights should be removed.
Fitting the wheel weights:
Remove the wheel hub retainer bolts and fit the wheel
weights stub axles. Using the handles provided on the
wheel weights, align the centre hole with the stub axle
and slide on the wheel weight until it rests against the
tyre. Secure the weight by inserting the lynchpin
through the hole provided in the stub axle.
A range of blades are available for the TMC2 Turf Cutter
Part Number
12” (30cm)
Sod Blade
TMCSB12
14” (35cm) Sod Blade TMCSB14
16” (40cm) Sod Blade TMCSB16
18” (45cm) Sod Blade TMCSB18
3” (75mm) Mole Drain Blade TMCMD3
