Page 3
SAFETY FIRST
1. All guards must be in place.
Always ensure that all guards are in position, properly fitted and maintained. Do not attempt to operate the
machine before making this check each time the machine is used.
2. Beware of bystanders.
Operators should be aware that it is possible that debris can exit from the sides of the machine, so this area
is best kept clear.
3. Always operate safely.
Never remove any guards or work at the any part of the mechanism while the engine is running. When tilt
ing the machine up to rest on the chassis nose to gain access to the cutter blade, always select a stable and
level surface. Be aware that in this forward tilted position, petrol can leak through the filler cap if the tank
is full. Take care not to allow petrol spillage or cause to ignite.
4. Never operate the machine with any parts missing.
Check the machine periodically for loose or damaged parts. Always use genuine Groundsman Industries
replacement parts. Failures caused by the use of spurious replacement parts will
not
be covered by the fac
tory warranty, nor will any liability be accepted for damages or injury thus incurred.
5. Modifications.
No liability will be accepted in respect of machines modified without specific
written
permission from
Groundsman Industries.
6. Observe the manual.
No liability will be accepted where injury or damage is caused by using the machine in a manner other than
detailed in this manual.
Always disengage blade drive before transporting the machine
Do not start this machine or carry out any maintenance until you have read and understand the
safety and operating instructions contained in this manual.
