Grosvenor IT31, Руководство пользователя

Страница: 8 / 32

Page 8
System Start-up
When the IT31 system is powered on, a bootloader runs which loads the Linux operating system. This runs
start-up scripts to set up and configure the terminal and to start enabled services.
When an application is installed and once the unit is fully booted, the initial screen gives you the opportunity
to enter the Terminal Setup by pressing the F8 key. If no key is pressed, the system times out and
automatically runs the installed application. See below:
Press F8 for Set-Up Menu
Factory App Launch Screen
If no application is installed, the terminal continually displays the prompt to enter the
Terminal Setup
.
With the
Factory App
installed, the following keys are active from the launch screen:
F3 (USB Setup)
: Installs application from a USB memory stick. This option is only available if a USB
memory stick with an application installation package is fitted. See “Deploying a Terminal Using a USB
Memory Stick” on page 26
F4 (Exit) : Exits the application momentarily, thus allowing the user to access the terminal’s set-up menus
for system configuration. See “Terminal Setup” on page 9
F7 (Net Setup)
: Allows network download of an application by specifying ID and PIN. See “Deploying a
Terminal Using a Network Connection” on page 26
F8 (Info) : Accesses Info pages on the Application, Firmware, Health and Network status.