Grosvenor IT31, Руководство пользователя

Страница: 9 / 32

Page 9
Terminal Setup
The set-up menus allow the terminal configuration to be changed at the terminal.
Note: Once connectivity is achieved between the terminal and a remote computer, the terminal can be
configured remotely either by downloading data using server software (such as Custom Exchange) or by
using tools such as TELNET and AssistIT. (See “Remote Connections” on page 20 )
Accessing the IT31 Terminal Setup
When accessing the terminal’s set-up, you are
prompted to enter a PIN before the set-up menus can
be accessed:
PIN Entry Screen
The default PIN is 1905; note that you can change this
if required (see “The Terminal PIN” on page 22 for
details).
The available Terminal Setup menus are as
follows:
Terminal Setup Screen
Application – used for managing the installed
application. See “Application Menu” on page
10
Firmware – used for managing the firmware
properties. See “Firmware Menu” on page
11
Services – used to enable and disable
services on the terminal. See “Services Menu”
on page 12
Settings – used for configuring a variety of
terminal properties. See “Settings Menu” on
page 13
USB – used to browse files via a USB
connection. See “USB menu” on page 18
Diagnostics – used to run a variety of tests.
See Diagnostics menu on page 22