Page 11
Terminal Setup
IT31 Firmware Menu
Firmware Screen
Options on the Firmware set-up menu are used to
manage the terminal firmware.
Info
Select this option to display firmware and terminal information:
Firmware
The current firmware version, e.g. IT3100.x.x.x1.0.0
Build Date
The current build date of the firmware
URL
The firmware’s update URL, used to check for newer firmware
versions
Bootloader
Bootloader version
MAC
Terminal MAC address, e.g. 00:01:CE:01:08:BC
Part No
Part/Serial No. detail of front panel assembly
PCB Revision
PCB revision
HW Tested
Date that terminal passed hardware test
Auto Update
This specifies whether the firmware is to check for new firmware
updates. The check is executed 30 minutes past every hour. If a newer
version of the firmware is found, it will be automatically downloaded and
installed.
Update
This forces the firmware to check immediately for a firmware update. If
one is found you are given the option to update or not.
Change PIN
This allows you to set a new PIN. This PIN is entered before entering
the set-up menus and also before running applications from the USB
memory stick. You must first re-enter the old one.
Reset to defaults
This resets the terminal to the state in which it left the factory. All
installed applications and user databases are deleted. All terminal
settings are reset to their default values and the terminal defaults to
DHCP.
Reboot terminal
This reboots the terminal. This is useful if the power cannot easily be
removed.
