Page 18
IO-Boards
If one or more EM-IO-USB-IT modules are connected, this option allows the operation of the relay outputs
and the input channels to be tested.
I/O Board #
n
Allows the selection of a particular IO-USB module.
Once selected, the following screen appears, which allows the status
of the relays to be toggled and the current status of the inputs to be
displayed.
Terminal Setup
USB menu
When you select this option and plug in a installation memory stick you will be presented with the following
options:
Depending on what files are present on the memory stick, you can do one of the following:
Install firmware image (IT3100-fw-*.bin)
Install application (*.app)
Restore backup (*.itbackup)
Please note that if an application installation
package is detected, you will be given the option of
installing.
Please refer to the IT Terminal Application
Deployment Manual for more information.
The files shown in the illustration are:
An application file – the file with the .app
extension.
An IT31 firmware file – the file with the .bin
extension.
If a firmware file is selected, you would be
prompted as follows:
Prompt to install firmware
