Page 21
Remote Connections
Using FTP
You can transfer files to and from the terminal using FTP. It is recommended that files are only copied to and
from the
/mnt/user
partition or
/tmp
directory. On Windows platforms the open source program FileZilla can
be used:
Note: The FTP service must be enabled as part of the terminal configuration. See Services menu on page
14.
Using VNC
If the VNC service is enabled on the terminal it is
possible to control the keyboard remotely by using a
VNC Client viewer program on the remote computer.
The example below uses UltraVNC viewer to
remotely control the terminal. The connection screen
is as follows:
Once connected, the remote terminal’s live display is
shown in a window on the computer’s desktop. The
keyboard on the remote computer causes the same
key to be pressed at the terminal.
In the example below, pressing F8 at the computer
will cause the terminal to enter the Info menu.
