Grizzly T27710, Руководство пользователя

Страница: 81 / 118

19
Air Cleaner/Intake
18 690 01 Rev. C KohlerEngines.com
AIR CLEANER
These systems are CARB/EPA certi fi ed and components
should not be altered or modi fi ed in any way.
Dual-Element Air Cleaner Components
A
B
D
C
E
A
A Wing Nut B Air Cleaner Cover
C Precleaner D Paper Element
E Air Cleaner Base
Low-Pro fi le Air Cleaner Components
I
H
G
F
F Air Cleaner Base G Foam Element
H Air Cleaner Cover I Screw
NOTE: Operating engine with loose or damaged air
cleaner components could cause premature
wear and failure. Replace all bent or damaged
components.
NOTE: Paper element cannot be blown out with
compressed air.
Dual-Element
Remove wing nut and air cleaner cover.
Precleaner
1. Remove precleaner from paper element.
2. Replace or wash precleaner in warm water with
detergent. Rinse and allow to air dry.
3. Reinstall precleaner over paper element.
Paper Element
1. Remove wing nut (if equipped) and paper element
with precleaner.
2. Separate precleaner from element; service
precleaner and replace element.
3. Reinstall precleaner over paper element; secure with
wing nut (if equipped).
Reinstall air cleaner cover and secure with wing nut.
Low-Pro fi le
1. Remove screw and air cleaner cover.
2. Remove foam element from base.
3. Wash foam element in warm water with detergent.
Rinse and allow to air dry.
4. Lightly oil foam element with new engine oil;
squeeze out excess oil.
5. Reinstall foam element into base.
6. Reinstall cover and secure with screw.
BREATHER TUBE
Make sure both ends of breather tube are properly
connected.
AIR COOLING
WARNING
Hot Parts can cause severe burns.
Do not touch engine while operating or just
after stopping.
Never operate engine with heat shields or guards
removed.
Proper cooling is essential. To prevent over heating,
clean screens, cooling fi ns, and other external surfaces
of engine. Avoid spraying water at wiring harness or any
electrical components. Refer to Maintenance Schedule.