Grizzly T27710, Руководство пользователя

Страница: 24 / 118

-22-
Model T27710 (Mfd. Since 04/16)
Work Location
Only use this log splitter outdoors, and never leave
the area while the engine is running.
NEVER run
the engine indoors such as in a garage, barn,
carport, or storage shed, even if it is ventilated.
Engine exhaust is poisonous and can kill people
and animals without warning.
Always use the splitter on a flat, stable work sur-
face, and block the log splitter wheels so it cannot
roll forward or backward.
Position the log splitter in a well lit, flat area at
least seven feet away from any dry leaves or com-
bustibles, and at least 25 feet from any fresh air
intake supplying working or living areas.
Working Clearances
Allow enough room on all sides to move logs to
and from the splitter.
Keep your work zone clear of lumber to avoid trip-
ping hazards while using the machine.
To tow splitter:
1. Lower log splitter cylinder and beam to hori-
zontal position, and lock with beam lock pin
(see
Figure 33).
Log splitter is NOT designed to be towed on
logging roads, forest service roads, public
roads, or highways. It is designed for towing
only where maximum speed will not exceed
45 MPH. Log splitter must be transported
between job sites on trailer capable of
carrying 1000 lbs.
2. Raise and lock support leg in up position with
support-leg lock pin (see
Figure 34).
3. Raise coupler lock lever (see Figure 34) to
unlatch it, and place coupler onto tow ball.
Figure 34. Raising support leg to towing
position.
Coupler
Lock Lever
Safety
Chains
Support Leg
Support-Leg
Lock Pin
Figure 33. Beam lock pin location.
Beam Lock Pin
Transporting Job Site
Considerations