Grizzly T27710, Руководство пользователя

Страница: 19 / 118

Model T27710 (Mfd. Since 04/16)
-17-
12. Attach engine to mounting pad with (4)
M8-1.25 x 65 hex bolts, (4) 8mm fender
washers, (4) 8mm lock washers, and (4)
M8-1.25 lock nuts (see
Figures 18–19).
Tighten fasteners evenly, in alternating pat-
tern, to reduce risk of cracking mounting
flange. DO NOT overtighten!
14. Remove plastic cap from pump pressure port
and add a couple of tablespoons of hydraulic
fluid into pressure port (see
Figure 21).
15. Unthread plastic plug from high pressure
hose (see
Figure 22).
16. Install high pressure hose onto pump pressure
fitting (see Figure 22) with (1) 11.2 x 2.4
O-ring.
Figure 22. High pressure hose and control lever.
Pump
Pressure
Fitting
High Pressure
Hose
Figure 21. Pump pressure port.
Location to Add
Hydraulic Fluid
Figure 18. Installing rubber spacers and flat
washers onto engine mounting pad.
Hex Bolt M8-1.25 x 65
Flat Washer 8mm
Lock Washer
8mm
Lock Nut
M8-1.25
Engine
13. Attach suction hose to hydraulic pump suc-
tion port and hydraulic tank with hose clamps
(see
Figure 20).
Figure 19. Engine fastener detail.
Rubber
Spacer
Mounting Pad
Fender Washer
10mm
Figure 20. Suction hose attached to hydraulic
pump and hydraulic tank.
Hydraulic
Pump
Hose
Clamps
Suction
Hose
Hydraulic Tank