Grizzly G1023S, Инструкция по эксплуатации, Страница: 26 / 52

-24- G1023S/G1023S110 Heavy-Duty 10'' Table Saw
Figure 25.
Figure 26.
#1
#2
#3
#4
Blade tilted to 45°
#1
#2
#3
#4
Blade tilted to 45°
11. Refer to Figures 25 and 26, for shim place-
ment. If the distance of A is longer than B,
shim(s) will need to be placed under corners
#1 and #2. If the distance of B is longer than
A, shim(s) will need to be placed under cor-
ners #3 and #4. Very thin shim stock works
well, just make sure they are all the same
thickness, and you put an equal number
under each of the two corners.
12. Tighten down one bolt a small amount and
then move on to each of the others, tighten-
ing each down the same amount. Continue
to rotate through the bolts, tightening them a
little each time until they are all secure.
13. Now recheck the blade to miter slot at 90°
and 45° by repeating
Steps 1-5. If the dis-
tance of A and B are equal, continue to the
“Miter Gauge” instructions. If the distances
are still off, repeat
Steps 9-12.
14. Once you feel you have the miter slot
adjusted to the blade, recheck all measure-
ments and be sure the table mounting bolts
are secure. Repeat
Step 10 in Section 4:
Assembly, “Blade Guard/Splitter.” Also, if
you ever remove the table in the future, be
sure to make note of shim placements and
reassemble exactly how it came apart.