manualshive.com logo in svg

Grizzly G0887, Руководство пользователя, Страница: 8 / 108

Поделиться
Скачать
Grizzly G0887 Скачать руководство пользователя страница 8

-6-

Model G0887 (Mfd. Since 01/19)

The information contained herein is deemed accurate as of 11/8/2021 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G0887

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0887 20" X 26" 5 HP INDUSTRIAL METAL‐

CUTTING BANDSAW

Product Dimensions:

Weight............................................................................................................................................................ 3747 lbs.

Width (side-to-side) x Depth (front-to-back) x Height......................................................................... 119 x 63 x 70 in.

Footprint (Length x Width)............................................................................................................................ 77 x 36 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight............................................................................................................................................................ 3960 lbs.

Length x Width x Height..................................................................................................................... 120 x 55 x 79 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement................................................................................................................... 220V, 3-Phase, 60 Hz

Full-Load Current Rating........................................................................................................................................ 25A

Minimum Circuit Size.............................................................................................................................................. 30A

Connection Type................................................................................................................................ Cord Connected

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length............................................................................................................................................... 12 ft.

Power Cord Gauge......................................................................................................................................... 10 AWG

Plug Included........................................................................................................................................................... No

Recommended Plug Type................................................................................................... L15-30 (Grizzly #T24832)

Switch Type.............................................................................................................. Control Panel w/Magnetic Switch

Recommended Phase Converter.......................................................................................................... G7978, H3473

Motors:

Main

Horsepower................................................................................................................................................ 5 HP

Phase.................................................................................................................................................... 3-Phase

Amps......................................................................................................................................................... 15.2A

Speed................................................................................................................................................ 1728 RPM

Type........................................................................................................................................... TEFC Induction

Power Transfer ........................................................................................................................................ V-Belt

Bearings........................................................................................................ Sealed & Permanently Lubricated

Hydraulic Pump

Horsepower................................................................................................................................................ 2 HP

Phase.................................................................................................................................................... 3-Phase

Amps........................................................................................................................................................... 5.7A

Speed................................................................................................................................................ 1720 RPM

Type........................................................................................................................................... TEFC Induction

Power Transfer ......................................................................................................................................... Direct

Bearings........................................................................................................ Sealed & Permanently Lubricated

Machine Data Sheet

Содержание G0887













































































































Отзывы:

Нет отзывов