Grizzly G0887, Руководство пользователя, Страница: 61 / 108

Model G0887 (Mfd. Since 01/19)
-59-
All machinery will develop serious rust problems
and corrosion damage if not properly prepared
for storage. If decommissioning this machine, use
the steps in this section to ensure that it remains
in good condition.
Storing Machine
Preparing Machine for Storage
2. Thoroughly clean all unpainted, bare metal
surfaces, then coat them with lightweight
grease or rust preventative. Take care to
ensure surfaces are completely covered but
grease or rust preventative is kept off of
painted surfaces.
— If machine will be out of service for short
period of time, use quality medium-weight
machine oil (not auto engine oil).
3. Remove old coolant, then add few drops of
way oil and clean lines with compressed air.
4. Loosen or remove blade so it does not stretch
or rust while machine is stored.
5. Place a few moisture-absorbing desiccant
packs inside of electrical box.
6. Cover machine with tarp or plastic sheet
that will keep out dust and resist moisture.
If machine will be near direct sunlight, use
cover that will block sun's rays.
Bringing Machine Out of Storage
To bring machine out of storage:
1. Remove moisture-absorbing desiccant packs
from electrical box.
2. Put on safety glasses.
3. Coat rust preventative with cleaner/degreaser,
then let it soak for 5–10 minutes.
4. Wipe off surfaces. If cleaner/degreaser is
effective, rust preventative will wipe off easily.
5. Repeat Steps 3–4 as necessary until clean.
6. Tension blade as described on Page 36.
7. Perform Test Run on Page 23.
Items Needed Qty
T26419 or NLGI#2 Grease Equivalent...As Needed
Rust Preventative .................................As Needed
Disposable Shop Rags ........................As Needed
Control Tags .........................................As Needed
Desiccant Packs ..................................As Needed
Tarp/Plastic Sheet ................................................ 1
Items Needed Qty
Disposable Shop Rags ........................As Needed
Cleaner/Degreaser ...............................As Needed
Safety Glasses ................................................1 Pr.
Disposable Gloves ...............................As Needed
Coolant ..................................................10 Gallons
To prepare machine for storage:
1. DISCONNECT MACHINE FROM POWER!