Grizzly G0887, Руководство пользователя, Страница: 45 / 108

Model G0887 (Mfd. Since 01/19)
-43-
To move movable vise jaw:
1. DISCONNECT MACHINE FROM POWER!
Moving Movable Vise Jaw
Once the headstock angle has been adjusted,
move the movable vise jaw as close to the blade
as possible to provide the utmost support for the
workpiece. Only move the jaw along the dovetail
track where it can secure workpiece without inter-
secting blade path.
Figure 49. Location of vise components.
Vise Position
Lock Handle
Dovetail Vise
Track
Movable
Vise Jaw
Fixed
Vise
4. Secure vise position by tightening vise posi-
tion lock handle.
Opening and Closing Vise
The hydraulics that open and close the movable
vise can be adjusted using the control panel (see
Figure 50).
Figure 50. Vise controls.
Vise Close
Button
Vise Open
Button
2. Loosen vise position lock handle by turning
handle counterclockwise (see Figure 49).
3. Push or pull movable vise on vise track until
it is close to blade but will not intersect blade
path (see
Figure 49).
Figure 51. Example of workpiece holding options
by material shape.
INCORRECT CORRECT
To open and close vise:
1. Turn ON hydraulics ( ).
2. Push vise open button (
) to release any
pressure on movable vise jaw.
3. Insert workpiece between jaws.
4. Push vise close button ( ) to clamp
workpiece. Between cuts, use vise open but-
ton (
) to release and reposition/reload a
new workpiece.
Note: Figure 51 shows correct methods of
holding different workpiece shapes.