Grizzly G0835, Руководство пользователя

Страница: 75 / 79

-58-
Model G0799 G0800 (Mfd. Since 11/17)
G0799
IMPACT INJURY HAZARD!
Improperly supported or positioned cutting
tools can “catch” on workpiece, ejecting tool
from your hands with great force. To reduce
this risk, always ensure tool rest is properly
positioned for each type of operation, cutting
tool is firmly supported against tool rest
BEFORE cutting, and cutting tool is properly
positioned for tool and operation type.
grizzly.com
SPINDLE
VARIABLE-SPEED
RANGES
BELT RPM
A
B 20–1000
200–3500
A
B
NOTE: To maximize spindle
torque, use Belt Position A
when turning at speeds less
than 1000 RPM.
Spindle
Motor
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
201 202 203 204 205
206
209
211
212
NOTICE
To restart lathe after engaging
Emergency Stop, turn spindle
direction switch to middle position
and reset Emergency Stop button.
214
213
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
NOTICE
DO NOT adjust. Improper settings
can cause damage, void warranty,
or disable safety features.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
210
210
208
207
Pin must be pulled out before
operating machine. Failure to
do so can damage motor or
machine components.
NOTICE
Specifications
MODEL G0799
20" X 48" HEAVY-DUTY WOOD LATHE
To reduce risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before starting.
2. Always wear safety glasses, face shield, and respirator.
3. Avoid getting entangled in rotating workpiece—tie back long hair, roll
up long sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
4. Properly set up lathe and tighten all locks before operating.
5. Rotate workpiece by hand to ensure clearance before applying power.
6. DO NOT turn split workpieces or those containing knots.
7. Rough out workpiece to remove excess material before mounting.
8. Use the lowest speed when starting a new workpiece.
9. Always support cutting tool on properly adjusted tool rest.
10. Disconnect power before setting up, adjusting, or servicing lathe.
11. DO NOT operate when tired or under influence of drugs/alcohol.
12. DO NOT expose to rain or operate in a wet environment.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
WARNING!
Power Supply: 220V, 1-Ph, 20 Hz, 15A
Motor: 2 HP, 220V, 3-Ph, 6.5A
Spindle Speeds: 20 – 3500 RPM
Distance Between Centers: 48"
Swing Over Bed: 20"
Swing Over Tool Rest Base: 16"
Spindle Taper: MT#2
Tailstock Taper: MT#2
Weight: 749 lbs.
Manufactured for Grizzly in China
Date
S/N
Labels
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
REF PART # DESCRIPTION REF PART # DESCRIPTION
201 P0799201 SPINDLE SPEED RANGE LABEL 209 P0799209 TOUCH-UP PAINT, GLOSSY BLACK
202 P0799202 READ MANUAL LABEL 210 P0799210 ELECTRICITY LABEL
203 P0799203 EYE/FACE INJURY HAZARD LABEL 211 P0799211 MODEL NUMBER LABEL (G0799)
204 P0799204 ENTANGLEMENT HAZARD LABEL 211 P0800211 MODEL NUMBER LABEL (G0800)
205 P0799205 IMPACT INJURY HAZARD LABEL 212 P0799212 GRIZZLY.COM LABEL
206 P0799206 GRIZZLY NAMEPLATE 213 P0799213 MACHINE ID LABEL (G0799)
207 P0799207 SPINDLE PIN NOTICE 213 P0800213 MACHINE ID LABEL (G0800)
208 P0799208 DO NOT ADJUST VFD NOTICE 214 P0799214 RESTART LATHE NOTICE