manualshive.com logo in svg

Grizzly G0835, Руководство пользователя

Поделиться
Скачать
Grizzly G0835 Скачать руководство пользователя страница 24

Model G0799 G0800 (Mfd. Since 11/17)

-7-

G0799 Machine Data Sheet

The information contained herein is deemed accurate as of 11/17/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G0799

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0799 20" X 48" HEAVY‐DUTY WOOD LATHE

Product Dimensions:

Weight.............................................................................................................................................................. 749 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 26 x 89 x 54 in.

Footprint (Length x Width)..................................................................................................................... 55-1/2 x 26 in.

Shipping Dimensions:

Type..................................................................................................................................... Cardboard w/Wood Skids

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 826 lbs.

Length x Width x Height....................................................................................................................... 58 x 31 x 30 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 220V

Full-Load Current Rating..................................................................................................................................... 13.6A

Minimum Circuit Size.............................................................................................................................................. 15A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 14 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 6-15

Switch Type.............................................................................................................................................. Push Button

Inverter (VFD) Type..................................................................................................................... Delta VFD015EL21A

Inverter (VFD) Size............................................................................................................................................... 2 HP

Motors:

Main

Horsepower................................................................................................................................................ 2 HP

Phase.................................................................................................................................................... 3-Phase

Amps........................................................................................................................................................... 6.5A

Speed................................................................................................................................................ 1720 RPM

Type........................................................................................................................................... TEFC Induction

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Main Specifications:

Operation Information

Swing Over Bed......................................................................................................................................... 20 in.

Swing Over Tool Rest Base....................................................................................................................... 16 in.

Distance Between Centers........................................................................................................................ 48 in.

Max. Distance Tool Rest to Spindle Center............................................................................................... 15 in.

No of Spindle Speeds............................................................................................................................ Variable

Spindle Speed Range................................................................................................................ 60 – 3500 RPM

Floor to Center Height............................................................................................................................... 44 in.

Headstock Rotation................................................................................................................................... Fixed

Содержание G0835
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды