Grizzly G0835, Руководство пользователя

Страница: 42 / 79

Model G0799 G0800 (Mfd. Since 11/17)
-25-
20. Use (2) M12-1.75 x 20 cap screws, (2)
12mm flat washers, and (2) 12mm lock
washers to install tool rack at end of lathe bed
(see
Figure 24).
Note: The tool rack can also be installed on
the front of the lathe bed (see
Figure 25)
using the same fasteners listed above.
21. Locate pre-installed lower hinge, hinge pin,
and brass washer (see Figure 26) at end of
lathe bed. Mount swing-away bed by lower-
ing upper hinge onto hinge pin (see
Figure
27). Leave M6-1 x 10 set screws loose for
now.
Figure 24. Tool rack mounted at end of bed.
Tool Rack
Figure 26. Lower hinge, hinge pin, and brass
washer for mounting swing-away bed.
Brass
Washer
Hinge Pin
Lower
Hinge
Figure 27. Swing-away bed hinge assembled.
Set Screws
Swing-Away Bed
Upper
Hinge
Lathe Bed
Hinge Pin
x 2
Figure 25. Tool rest mounted on front of bed.
Tool
Rack
x 2