Before starting any cleaning operation, it is suggested to disconnect the projector from the power
supply, by unplugging the unit.
Before opening the upper lid of the projector, it is suggested to wait for at least 15 minutes after the
lamp has been switched off.
6.0 TECHNICAL INFORMATION
7.0 SPARE PARTS
All components for the PRO-MOTION unit are available on request.
Griven S.r.l. is liable for the product until the unit is delivered to the shipping company: any claim
for damage occurred during transport must be addressed directly to the forwarding company.
Complaints will be accepted within 7 days from reception of the unit and no later.
Before returning any projector, authorization by Griven s.r.l. is necessary and the unit must be
returned back along with the needed fiscal documents.
PRO-MOTION warranty does not include consumables.
Exploded views, the electrical wire diagram, the electronic layout and the advertising brochure are
available on request.
22
Size
L480 x P780 x H660
mm
Weight
42 + 25 (Ballast)
Kg
Body
Zinc steel body
Operating voltage
230
V
Operating Frequency
50 or 60
Hz
Operating Amperage
11
A
Power absorbed
2530
VA
Suggested lamp
HT I 1800W/SE
Base
GY22
Optic system
Condensing lenses
Electronic parts fuse
5x20 250V 3,15A
Lamp fuse
6,3x32 250V 20A
Protection degree
IP44
Max body temperature
90
°C
Max ambient temperature
35
°C
PRO-MOTION 2000
