manualshive.com logo in svg

Grindex 8120.280 Sandy Inox, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Grindex 8120.280 Sandy Inox Скачать руководство пользователя страница 25

Condition

Action

The pump has a CEE plug with

internal phase shifter.

1. Pull out the plug.
2. Shift two phases.
3. Wait until the motor has stopped.
4. Connect the plug.

WS006206A

The pump has a phase shifter with an

on/off switch.

1. Turn the knob on the phase shifter

to neutral position.

2. Wait until the motor has stopped.
3. Turn the knob to the opposite

position from before.

WS006208A

The pump has neither a CEE plug with

internal phase shifter, nor a phase

shifter with an on/off switch.

Transpose two phase leads on the

output terminal of the starter.

NOTICE:
Do not reverse the phase sequence while the pump is running. Temporarily

incorrect rotation can occur, resulting in damage to motor electronics and

rotating parts.

The pump should start. If it does not, then contact a certified electrician to

check the mains and the junctions.

4  Installation

8120.280 Sandy Inox Installation, Operation, and Maintenance Manual

23

Содержание 8120.280 Sandy Inox













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды