manualshive.com logo in svg

Grindex 8120.280 Sandy Inox, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Grindex 8120.280 Sandy Inox Скачать руководство пользователя страница 20

WS004313F

Screened SUBCAB

T

1

T

2

T

3

T

4

Figure 2: Aluminum foil on the control element.

c) Put a white shrink hose over the drain wire.
d) Twist T1+T2 and T3+T4.
e) Put a shrink hose over the control element.

Make sure that the conductive aluminum foil and drain wire are covered.

3. Prepare the ground (earth) core of the SUBCAB

™

 cable:

a) Peel the yellow-green insulation from the ground (earth) core.
b) Check that the ground (earth) core is at least 10% longer than the phase

cores in the cabinet.

c) If applicable, put a cable lug on the ground core.

4. Prepare the ground (earth) core of the screened SUBCAB

™

 cable:

a) Untwist the screens around the power cores.
b) Twist all power core screens together to create a ground (earth) core.
c) Put a yellow-green shrink hose over the ground (earth) core.

Leave a short piece uncovered.

d) Check that the connected ground (earth) core has sufficient slack. The

core must stay connected even if the power cores are pulled loose.

5. Prepare the power cores:

a) Remove the aluminum foil around each power core.
b) Peel the insulation from each power core.

6. Prepare the ends of the ground (earth) core, the power cores, and the drain

wire:

Connection type

Action

Screw

Fit cable lugs to the ends.

Terminal block

Fit end sleeves or leave the ends as they are.

4.4.5  Connect the motor cable to the pump

NOTICE:
Leakage into the electrical parts can cause damaged equipment or a blown fuse.

Keep the end of the motor cable dry at all times.

1. Check the data plate to see which connections are required for the power

supply.

2. Connect the motor cable conductors, including ground (earth), to the terminal

or starter unit.

3. Make sure that the pump is correctly connected to ground (earth).
4. Tighten the cable entry into its bottom-most position.

The seal sleeve and the washers must conform to the outside diameter of the

cables.

4  Installation

18

8120.280 Sandy Inox Installation, Operation, and Maintenance Manual

Содержание 8120.280 Sandy Inox













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды