Grindex 8120.280 Sandy Inox, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 44

DANGER: Explosion/Fire Hazard
Special rules apply to installations in explosive or flammable atmospheres. Do
not install the product or any auxiliary equipment in an explosive zone unless it
is rated explosion-proof or intrinsically-safe. If the product is rated explosion-
proof or intrinsically-safe, then see the specific explosion-proof information in
the safety chapter before taking any further actions.
4.4.6 Cable charts
Connection locations
WS001021E
L1 L2 L3 T3 T4 T1 T2
15
13
14
4 2 3 1
7
10
5
9
8
6
11
12
17
16
24
22
23
19
20
21
18
25
26
CT
1 Starter equipment and main
leads (L1, L2, L3)
14 Transformer
2 Ground (earth) 15 Capacitor
3 Functional ground 16 Softstarter
4 Control leads (T1, T2, T3, T4) 17 Level regulator
5 Phase shifter 18 Contactor, start relay or thermal
relay
6 Diode 19 Thermal detector in stator
7 Motor cable 20 Thermal detector in main bearing
8 Screen 21 Jumper
9 Pump 22 Terminal board, terminal plate
10 Crimp connection 23 Leakage sensor
11 Crimp isolation 24 Stator leads (U1, U2, U5, U6, V1,
V2, V5, V6, W1, W2, W5, W6,
Z1, Z5, Z6)
12 Motor protector 25 Current transformer
13 Coil 26 Terminal block
4 Installation
8120.280 Sandy Inox Installation, Operation, and Maintenance Manual 19