SINEWAVE GRINFINEON CONTROLLER MANUAL
Rev 2.1
-6-
The brushless hub motor will have 3 phase wires that need to terminate with the
3 controller wires. Typically these are green, yellow, and blue, but many other
possibilities exist. If you are running the motor sensorless, then it is only these 3
wires you need to connect and the color pairing does not really matter. If the
motor spins backwards, then simply swap any pair of wires to reverse it.
Figure 5: Example of Motor Direction Change by Swapping Phase Wires
If you want regenerative braking in a basic setup, then you can connect either an
ebrake cutoff lever or other momentary push switch to the 4-pin ebrake plug.
