SINEWAVE GRINFINEON CONTROLLER MANUAL
Rev 2.1
-18-
4.6
Won't Show CA Accessory Current Draw
The CA-DP plug on the motor controller is wired up so that it will show the
current draw of the motor and controller, but not the current draw of any other
devices (like front lights) that are plugged into the CA's power tap. If you want the
Cycle Analyst to show auxiliary device current, then the controller can be opened
up and the black wire from the CA-DP cable moved from the - side of the shunt
(adjacent to the blue wire) to the + side of the shunt (adjacent to white wire).
