manualshive.com logo in svg

GreenWorks PSCS06B00, Руководство пользователя

Поделиться
Скачать
GreenWorks PSCS06B00 Скачать руководство пользователя страница 8

8

ELECTRICAL

DOuBLE INSuLATED 

The pole saw is double insulated to provide a double thickness of insulation between you and 

the tool’s electrical system. All exposed metal parts are isolated from the internal metal motor 

components with protective insulation.

GROuNDING INSTRuCTIONS

IN THE EVENT Of A MALfUNCTION OR BREAKDOWN, grounding provides the path of least 

resistance for electric current, and reduces the risk of electric shock.
This tool is equipped with a power cord that has a POLARIZED plug. The power cord MUST be 

plugged into a matching outlet that is properly installed and grounded in accordance with ALL 

local codes and ordinances.

DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet 

installed by a qualified electrician.

W A R N I N G

To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. This 

chainsaw is wired at the factory for 120V operation. Connect to a 120V, 15A circuit, and use a 

15A time-delayed fuse or circuit breaker. To avoid shock or fire when the power cord is worn, cut, 

or damaged in any way, replace it immediately.

W A R N I N G

To avoid injury, use only identical replacement parts when servicing the pole saw.

W A R N I N G

Double insulation does not take the place of normal safety precautions when operating this tool.

W A R N I N G

TO AVOID ELECTRIC SHOCK:  

1. Use only identical replacement parts when servicing a tool with double insulation. Servicing 

should be performed by a qualified technician.

 

2. Do not use in wet or damp areas or expose to rain.

W A R N I N G

In all cases, make certain the receptacle in question is properly grounded. If you are not sure, 

have a certified electrician check the receptacle.

Содержание PSCS06B00































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды