manualshive.com logo in svg

GreenWorks PSCS06B00, Руководство пользователя

Поделиться
Скачать
GreenWorks PSCS06B00 Скачать руководство пользователя страница 14

14

ASSEMBLY

CONNECTING THE POLES

Before using the pole saw, assembly is required. When removed from the box, the three poles 

are connected by an electrical cord, as shown.

• 

Unscrew the collar from the threaded base on the intermediate pole, and push back over the 

cord to the handle pole shaft, as shown.

• 

Insert the handle pole into the intermediate pole, and slide together until you hear the button 

click. The tubes are oval-shaped, and will only install one way.

• 

Lower the collar on the handle pole to the threaded base on the intermediate pole and rotate 

clockwise to secure.

• 

Repeat this process to attach the powerhead pole.

NOTE: If using the product as a chainsaw, no assembly is required.

NOTE: Handle pole and chainsaw pole should not be able to separate from intermediate pole once 

assembled correctly. Repeat above steps if poles can be separated from intermediate pole.

W A R N I N G

Do not allow familiarity with this product to make you careless. Remember that a careless 

fraction of a second is sufficient to inflict serious injury.

W A R N I N G

Always wear safety goggles or safety glasses with side shields when operating power tools. 

Failure to do so could result in objects being thrown into your eyes, resulting in possible serious 

injury.

FIG.2

HANDLE POLE

INTERMEDIATE POLE

THREADED BASE

COLLAR

THREADED BASE

CHAINSAW

(Detachable Saw — saw detaches from pole

for delimbing and trimming)

CHAINSAW POLE

COLLAR

CORD

BuTTON

BuTTON

Содержание PSCS06B00































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды