manualshive.com logo in svg

GreenWorks PSCS06B00, Руководство пользователя

Поделиться
Скачать
GreenWorks PSCS06B00 Скачать руководство пользователя страница 15

15

ASSEMBLY

ADDING BAR AND CHAIN LuBRICANT

Use a bar and chain lubricant (not included) with this product. It is designed for chains and chain 

oilers, and is formulated to perform over a wide temperature range with no dilution required.

• 

Remove oil cap.

• 

Carefully pour the bar and chain oil into the tank.

• 

Wipe off excess oil. Replace oil cap.

• Check and fill the oil tank when quick view oil indicator is below the second to last indicator 

line.

• 

Repeat as needed.

NOTE: This pole saw comes from the factory with no bar and chain oil added. Level should also be checked 

after every 20 minutes of use and refilled as needed.

NOTE: Do not use dirty, used or otherwise contaminated oils. Damage may occur to the bar or chain.

NOTE: It is normal for oil to seep from the saw when not in use. To prevent seepage, empty the oil tank after 

each use, then run for one minute. When storing the unit for a long period of time (three months or longer), be 

sure the chain is lightly lubricated; this will prevent rust on the chain and bar sprocket.

W A R N I N G

To preserve natural resources, please recycle or dispose of oil properly. Consult your local waste 

authority for information regarding available recycling and/disposal options.

OIL RESERvOIR 

QuICK-vIEW

OIL INDICATOR

CAP

Min

CHA

IN

 

LUB

RIC

ANT

FIG.3

Содержание PSCS06B00































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды