4
IMPORTANT SAfETY INSTRUCTIONS
E.
Do not overreach. Keep proper footing and balance at all times.
This enables better control
of the power tool in unexpected situations.
f.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
G.
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
Use of these devices can reduce dust-related
hazards.
4. POWER TOOL uSE AND CARE
A.
Do not force the power tool. use the correct power tool for your application.
The correct
power tool will do the job better and safer at the rate for which it was designed.
B.
Do not use the power tool if the switch does not turn it on and off
. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
C.
Disconnect the plug from the power source from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
D.
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are dangerous
in the hands of untrained users.
E.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tools operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
G.
use the power tool, accessories and tool bits etc., in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power
tool for operations different from those intended could result in a hazardous situation.
5. SERvICE
A.
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETy RuLES
•
Kickback is a dangerous reaction that can lead to serious injury. Kickback may occur
when the moving chain contacts an object at the upper portion of the tip of the guide
bar or when the wood closes in and pinches the chain in the cut.
Contact at the upper
portion of the tip of the guide bar can cause the chain to dig into the object and stop the chain
for an instant. The result is a lightning-fast, reverse reaction which kicks the guide bar up
and back toward the operator. If the chain is pinched along the top of the guide bar, the guide
bar can be driven rapidly back toward the operator, which can cause loss of control and may
result in serious injury. Do not rely exclusively upon the safety devices built into the product.
With a basic understanding of kickback, you can reduce or eliminate the element of surprise.
Sudden surprise contributes to accidents.
•
Do not operate near electrical power lines.
The unit has not been designed to provide
protection from electric shock in the event of contact with overhead electric lines. Consult
local regulations for safe distances from overhead electric power lines and ensure that the
Содержание PSCS06B00
Страница 29: ...29 exploded view ...
