GreenWorks PSCS06B00 Скачать руководство пользователя страница 3

Страница: 3 / 30

IMPORTANT SAfETY INSTRUCTIONS

W A R N I N G

Read and understand all instructions before using this product.

failure to follow all

instructions listed below may result in electric shock, fire, and/or serious personal injury.

Save all warnings and instructions for future reference.

The term “power tool” in all of the warnings listed below refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

1. WORK AREA SAFETy

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool.

Distractions can cause

you to lose control.

2. ELECTRICAL SAFETy

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching

outlets will reduce risk of electric shock.
B.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will

increase the risk of electric shock.
D.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled

cords increase the risk of electric shock.
E.

When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.
f.

If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3. PERSONAL SAFETy

Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or

medication.

A moment of inattention while operating power tools may result in serious personal

injury.

Use personal protective equipment. Always wear eye protection.

Safety equipment such as

dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions

will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting

to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools

with your finger on the switch or energising power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key

left attached to a rotating part of the power tool may result in personal injury.

Содержание PSCS06B00































Результаты поиска

Содержание PSCS06B00

Отзывы:

Бренды по названию

Популярные бренды

GreenWorks PSCS06B00, Руководство пользователя

Результаты поиска

Содержание PSCS06B00

Отзывы:

Бренды по названию

Популярные бренды